AML M3000 Guide de l'utilisateur télécharger pdf (Page 39)

M3000 Portable Bar Code Reader User's Guide

4-12

2. SQUEEZE the TRIGGER on the laser. The "SCAN" light on the back of the laser turns

on.

Simultaneously the laser emits a thin red beam of light. The beam must cover the entire

bar code label and part of the white area on both sides.

NOTES: 1. If the laser has not read the label within approximately one second, it

turns off the beam. Try moving the laser closer to the bar code label

and adjusting the pointing angle.

2. If the Laser/CCD setup ALWAYS RUN option is OFF, the trigger

must be released between scans. See FUNC SETUP.

3. After a successful read the following occurs:

• The reader BEEPS.

• The "DECODE" light on the back of the laser turns on.

123456

RIGHT

WRONG

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 155 156

Pas de commentaire

AML M3000 Guide de l'utilisateur Page 39